Yealink SIP-T46G Guide

User Guide SIP-T46G IP Phone
114
How to reboot the phone?
To reboot the IP phone via web user interface:
1. Click on Phone->Upgrade.
2. Click Reboot to reboot the IP phone.
Note
How to reset your phone?
Reset your phone when other Troubleshooting suggestions do not correct the problem.
You need to note that all customized settings will be overwritten after resetting. We
recommend asking your system administrator for advice before resetting your phone.
To reset your phone via phone user interface:
1. Press Menu->Setting->Advanced Settings (password: admin).
2. Press or to scroll to Reset to factory, and then press the Enter soft
key.
The LCD screen prompts the following message:
3. Press the OK soft key.
Note
How to Export PCAP Trace?
We may need you to provide a PCAP Trace to help analyze your problem.
To export a PCAP Trace via web user interface:
1. Click on Phone->Upgrade.
2. Click Start to begin recording signal traffic.
3. Recreate the error to be documented in the trace.
4. Click Stop to end recording.
5. Click Export to open file download window, and then save the file to your local
Any reboot of your phone may take a few minutes.
Reset of your phone may take a few minutes.

Yealink SIP-T46G Specifications

General

Backlight	Yes
Power requirements	100-240V, DC 5V
Touchscreen	-
Display diagonal	4.3 \
Display resolution	480 x 272 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
Voice codecs	G.711, G.722, G.723, G.726, G.729A, G.729B
Bluetooth	No
RJ-9 ports quantity	2
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports	1
Storage temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	185 mm
Width	244 mm
Height	213 mm