Yealink SIP-T46G Guide

Customizing Your Phone
31
Answer call only: All keys are locked. Incoming calls will be answered
automatically, but cannot be ended by your party.
Note
To set the keypad lock PIN via phone user interface:
1. Press Menu->Setting->Basic Settings->Phone Unlock PIN.
2. Enter the Current PIN, New PIN and Confirm PIN in the corresponding fields.
3. Press the Confirm soft key to accept the setting or the Back soft key to cancel.
Note
To activate the keypad lock via phone user interface:
1. Press Menu->Setting->Advanced Settings (password: admin) ->Phone Setting->Lock.
2. Press or , or the Switch soft key to select the desired type from the Keypad
Lock field.
3. Press the Save soft key to accept the change.
4. Long press to lock the keypad immediately when the phone is idle.
The emergency number setting, if desired, must be made before lock activation. For
more information, refer to Emergency Number on page 65.
The PIN code can only be 0~9, and not more than 15 characters.
The current PIN is 123.

Yealink SIP-T46G Specifications

General

Backlight	Yes
Power requirements	100-240V, DC 5V
Touchscreen	-
Display diagonal	4.3 \
Display resolution	480 x 272 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
Voice codecs	G.711, G.722, G.723, G.726, G.729A, G.729B
Bluetooth	No
RJ-9 ports quantity	2
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports	1
Storage temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	185 mm
Width	244 mm
Height	213 mm