Yealink SIP-T46G Guide

Customizing Your Phone
55
Label (key label displays on the LCD screen)
Xml Browser (the access URL for xml browser)
Usage: Press the DSS key to access the Xml browser specified in the Xml Browser field.
LDAP
You can use this key feature to access the LDAP search interface quickly.
Dependencies: Type (Key Event)
Key Type (LDAP)
Label (key label displays on the LCD screen)
Usage:
1. Press the DSS key to access the LDAP search interface.
2. Enter a few continuous characters of the contact name or continuous numbers of
the contact phone number using the keypad.
The contacts whose name or phone number matches the characters entered will
appear on the LCD screen.
BroadSoft Dir
You can use this key feature to access the BroadSoft group in the BroadSoft phonebook
quickly. You should configure the BroadSoft phonebook in advance. For more
information, refer to BroadSoft Phonebook on page 43.
Dependencies: Type (Key Event)
Key Type (BroadSoft Dir)
BroadSoft Name (the BroadSoft group name you want to access if the
BroadSoft phonebook is configured)
Label (key label displays on the LCD screen)
Usage: Press the DSS key to access the BroadSoft group specified in the BroadSoft
Name field.
Conference
You can use this key feature to set up a conference call. For more information, refer to
Conference on page 83.
Dependencies: Type (Key Event)
Key Type (Conf)
Label (key label displays on the LCD screen)
Value (the number you want to add to the conference)
Usage: Press the DSS key during an active call to set up a conference with the number
specified in the Value field.
Note
When leaving the Value field blank, the DSS key performs the same as the Conf soft key
during a call.

Yealink SIP-T46G Specifications

General

Backlight	Yes
Power requirements	100-240V, DC 5V
Touchscreen	-
Display diagonal	4.3 \
Display resolution	480 x 272 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
Voice codecs	G.711, G.722, G.723, G.726, G.729A, G.729B
Bluetooth	No
RJ-9 ports quantity	2
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports	1
Storage temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	185 mm
Width	244 mm
Height	213 mm