EasyManuals Logo

Yealink SIP-T46S User Manual

Yealink SIP-T46S
253 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #105 background imageLoading...
Page #105 background image
Customizing Your Phone
93
Configuring a Forward Key
When the phone receives an incoming call, you can press the Forward key to forward the
incoming call to the pre-defined number. When the phone is idle, the key behavior depends on
the forward modes:
Forward Modes
Key Behavior
Phone Mode
(refer to Phone Mode)
Destination number is configured:
Press the Forward key to activate/deactivate the always
forward feature or switch the target among Forward keys.
Destination number is blank:
Press the Forward key to enter the forward setting screen or
activate/deactivate the forward feature (if forward has been
configured from the Call Forward menu).
Custom Mode
(refer to Custom Mode)
Press the Forward key to enter the forward setting screen.
Procedure:
1. Navigate to Menu->Features->DSS Keys, and then select a desired line key.
2. Select Key Event from the Type field.
3. Select Forward (FWD) from the Key Type field.
4. (Optional.) Enter the string that will display on the LCD screen in the Label field.
5. (Optional.) Enter the destination number you want to forward the incoming calls to in the
Value field.
6. Press Save.
Note
Configuring a Transfer Key
You can perform a Blind, Semi-Attended or Attended Transfer by pressing the transfer key
during a call.
Procedure:
1. Navigate to Menu->Features->DSS Keys, and then select a desired line key.
2. Select Key Event from the Type field.
3. Select Transfer (Trans) from the Key Type field.
4. (Optional.) Enter the string that will display on the LCD screen in the Label field.
If the Value field is left blank, the Forward key performs the same as the Forward (FWD) soft key
when receiving an incoming call.
Downloaded from ManualsNet.com search engine

Table of Contents

Other manuals for Yealink SIP-T46S

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T46S and is the answer not in the manual?

Yealink SIP-T46S Specifications

General IconGeneral
ManualYes
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Voice codecsCNG, G.711Mu, G.711a, G.722, G.723.1, G.726, G.729ab, VAD, iLBC
Lines quantity16 lines
Phonebook capacity1000 entries
Number of VoIP accounts16
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Display diagonal4.3 \
Display resolution480 x 272 pixels
AC adapter input voltage100 - 240 V
AC adapter output current2 A
AC adapter output voltage5 V
Dual-Tone Multi-Frequency (DTMF) modesIn-band, Out-of band, SIP info
Volume controlDigital
Number of programmable keys10
USB 2.0 ports quantity1
Ethernet LAN (RJ-45) ports2
Networking standardsIEEE 802.3af
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
Supported network protocolsSIP v1, SIP v2, LLDP/CDP/DHCP, OpenVPN, IEEE802.1X, IPv6, FTP/TFTP/HTTP/HTTPS
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Depth213 mm
Width244 mm
Height185 mm
Package depth255 mm
Package width274 mm
Package height128 mm

Related product manuals