EasyManuals Logo

Yealink SIP-T46S User Manual

Yealink SIP-T46S
253 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #175 background imageLoading...
Page #175 background image
Advanced Phone Features
163
Transferring a call to the monitored user. The phone handles the active call differently
depending on the configuration of Transfer Mode via Dsskey. For more information on the
Transfer Mode via Dsskey, refer to Configuring Transfer Mode via Dsskey.
Picking up an incoming call of the monitored User. Before picking up an incoming call,
ensure that the BLF List Pickup Code has been configured in advance. For more
information on how to configure the BLF List Pickup Code, refer to Configuring BLF List
Settings.
Barging in a conversation and setting up a conference call. Before barging in an active call,
ensure that the BLF List Barge In Code has been configured in advance. For more
information on how to configure the BLF List Barge In Code, refer to Configuring BLF List
Settings.
Retrieving a parked call from the monitored user. Before retrieving the parked call, ensure
that the BLF List Retrieve Call Parked Code has been configured in advance. For more
information on how to configure the Retrieve Call Parked Code, refer to Configuring BLF
List Settings.
For more information on how to use these features, refer to Busy Lamp Field (BLF).
Configuring BLF List Settings
Procedure:
1. Click Account->Advanced.
2. Select the desired account from the pull-down list of Account.
3. Enter the BLF List URI in the BLF List URI field.
4. (Optional.) Enter the directed call pickup code in the BLF List Pickup Code field.
If the code is not configured, the phone will place a call to the monitored user instead of
picking up the incoming call of the monitored user when you press the BLF List key.
5. (Optional.) Enter the barge-in code in the BLF List Barge In Code field.
If the code is not configured, the phone will place a call to the monitored user instead of
barging in an active call of the monitored user when you press the BLF List key.
6. (Optional.) Enter the park retrieve code in the BLF List Retrieve Call Parked Code field.
Downloaded from ManualsNet.com search engine

Table of Contents

Other manuals for Yealink SIP-T46S

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T46S and is the answer not in the manual?

Yealink SIP-T46S Specifications

General IconGeneral
ManualYes
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Voice codecsCNG, G.711Mu, G.711a, G.722, G.723.1, G.726, G.729ab, VAD, iLBC
Lines quantity16 lines
Phonebook capacity1000 entries
Number of VoIP accounts16
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Display diagonal4.3 \
Display resolution480 x 272 pixels
AC adapter input voltage100 - 240 V
AC adapter output current2 A
AC adapter output voltage5 V
Dual-Tone Multi-Frequency (DTMF) modesIn-band, Out-of band, SIP info
Volume controlDigital
Number of programmable keys10
USB 2.0 ports quantity1
Ethernet LAN (RJ-45) ports2
Networking standardsIEEE 802.3af
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
Supported network protocolsSIP v1, SIP v2, LLDP/CDP/DHCP, OpenVPN, IEEE802.1X, IPv6, FTP/TFTP/HTTP/HTTPS
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Depth213 mm
Width244 mm
Height185 mm
Package depth255 mm
Package width274 mm
Package height128 mm

Related product manuals