Yealink SIP-T46S - Page 209

Advanced Phone Features
197
Role
You can do…
Status
(NewCall) and Retrieve appear on the
touch screen.
Tap Retrieve to retrieve the call.
automatically. And the line key
icon on boss phone and
secretary phone becomes .
On other IP phones:
• Press the line key.
• Long press the desired line key.
The Cancel, Call Pull (CallPull), New Call
(NewCall) and Retrieve appear on the
LCD screen.
Press Retrieve to retrieve the call.
The conversation is established
between secretary and the third
party, while boss phone
disconnects the call
automatically. And the line key
LEDs on boss phone glows red
and secretary phone glows
green.
Retrieving a Call Placed on Private Hold
The private held call can be only retrieved by the hold party.
Procedure:
Role
You can do…
Status
Boss
Call is private held by boss:
• On the SIP-T48S/T48G IP phone,
tap , press the HOLD key or tap
Resume.
• On other IP phones, press the line key,
the HOLD key or the Resume.
The conversation between boss
and the third party is retrieved.
Secretary
Call is private held by secretary:
• On the SIP-T48S/T48G IP phone,
tap , press the HOLD key or tap
Resume.
• On other IP phones, Press the line key,
the HOLD key or Resume.
The conversation between
secretary and the third party is
retrieved.
Barging In an Active Call
Both the boss and the secretary can barge in an activate call and set up a conference call with
the other parties.
During the conference, if any party in the conference call presses the HOLD key or the Hold soft
key, two-way voice can be heard between the remaining parties. If boss or secretary press the
End Call (EndCall) soft key, the remaining parties are still connected. If the other party (not the
shared line party) press the End Call (EndCall) soft key, the conference call is ended.
Downloaded from ManualsNet.com search engine