EasyManuals Logo

Yealink SIP-T54W Administrator's Guide

Yealink SIP-T54W
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #185 background imageLoading...
Page #185 background image
Audio Features
182
[1]
X is the account ID. For T57W/T54W/T48U/T48S/T48G/T46U/T46S/T46G/T29G, X=1-16; for
T53W/T53/T43U/T42G/T42U/T42S, X=1-12; for T41P/T41S/T27G, X=1-6; for T40P/T40G/T23P/T23G, X=1-3; for T21
(P) E2, X=1-2; for T19(P) E2/CP920, X=1.
[2]
If you change this parameter, the phone will reboot to make the change take effect.
Suppress DTMF Display
Suppress DTMF display allows the phones to suppress the display of DTMF digits during an active call. DTMF digits
are displayed as “*” on the phone screen. Suppress DTMF display delay defines whether to display the DTMF digits
for a short period of time before displaying as “*”.
Topic
Suppress DTMF Display Configuration
Suppress DTMF Display Configuration
The following table lists the parameters you can use to configure the suppress DTMF display.
Parameter
features.dtmf.hide <y0000000000xx>.cfg
Description
It enables or disables the phone to suppress the display of DTMF digits during an active call.
Permitted
Values
0-Disabled
1-Enabled, the DTMF digits are displayed as asterisks.
Default
0
Web UI
Features > General Information > Suppress DTMF Display
Parameter
features.dtmf.hide_delay <y0000000000xx>.cfg
Description
It enables or disables the phone to display the DTMF digits for a short period before displaying aster-
isks during an active call.
Note: It works only if “features.dtmf.hide” is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
0
Web UI
Features > General Information > Suppress DTMF Display Delay
Transfer via DTMF
Call transfer is implemented via DTMF on some servers. The IP phone sends specified DTMF digits to the server for
transferring calls to third parties.
Topic
Transfer via DTMF Configuration
Transfer via DTMF Configuration
The following table lists the parameters you can use to configure the transfer via DTMF.
Parameter
features.dtmf.replace_tran <y0000000000xx>.cfg
Description
It enables or disables the phone to send designated DTMF sequences for transfer function when
pressing the Tran/Transfer soft key or TRAN/TRANSFER key.
Permitted
Values
0-Disabled
1-Enabled

Table of Contents

Other manuals for Yealink SIP-T54W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T54W and is the answer not in the manual?

Yealink SIP-T54W Specifications

General IconGeneral
ConnectivityDual-port Gigabit Ethernet
SIP Accounts16
Opus Codec SupportYes
Audio FeaturesHD voice with Yealink Acoustic Shield technology
Expansion ModuleSupports up to 3 EXP50 expansion modules
Power over Ethernet (PoE)Yes
Headset SupportYes, RJ9 headset port, USB headset support, Bluetooth headset support
Resolution480 x 272 pixels
BluetoothYes, Bluetooth 4.2
USB Ports2 (USB 2.0)

Related product manuals