EasyManuals Logo

Yealink SIP-T54W Administrator's Guide

Yealink SIP-T54W
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #538 background imageLoading...
Page #538 background image
Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
535
Viewing the Log Files
Local Logging Configuration
The following table lists the parameters you can use to configure local logging.
Parameter
static.local_log.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to record log locally.
Note: We recommend that you do not disable this feature.
Permitted
Values
0-Disabled, the phone will stop recording log to the log files locally. The log files recorded before are
still kept on the phone.
1-Enabled, the phone will continue to record log to the log files locally. You can upload the local log
files to the provisioning server or a specific server or export them to the local system.
Default
1
Web UI
Settings > Configuration > Enable Local Log
Parameter
syslog.usb.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to collect log using a USB flash drive.
Note: It works only if "static.local_log.enable" is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
0
Supported
Devices
All phones except T48G, T46G, T42G, T41P, T40P, T40G, T29G, T23P, T23G, T21(P) E2 and T19(P)
E2
Web UI
Settings > Configuration > USB Auto Exporting Syslog
Parameter
static.local_log.level <y0000000000xx>.cfg
Description
It configures the lowest level of local log information to be rendered to the <MAC>.log file.
When you choose a log level, it includes all events of an equal or higher severity level and excludes
events of a lower severity level. The logging level you choose determines the lowest severity of events
to log.
Permitted
Values
0-the system is unusable
1-action must be taken immediately
2-critical condition
3-error conditions
4-warning conditions
5-normal but significant condition
6-informational
Default
3
Web UI
Settings > Configuration > Local Log Level
Parameter
static.local_log.max_file_size <y0000000000xx>.cfg
Description
It configures the maximum size (in KB) of the log files can be stored on the IP phone.
When this size is about to be exceeded,

Table of Contents

Other manuals for Yealink SIP-T54W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T54W and is the answer not in the manual?

Yealink SIP-T54W Specifications

General IconGeneral
ConnectivityDual-port Gigabit Ethernet
SIP Accounts16
Opus Codec SupportYes
Audio FeaturesHD voice with Yealink Acoustic Shield technology
Expansion ModuleSupports up to 3 EXP50 expansion modules
Power over Ethernet (PoE)Yes
Headset SupportYes, RJ9 headset port, USB headset support, Bluetooth headset support
Resolution480 x 272 pixels
BluetoothYes, Bluetooth 4.2
USB Ports2 (USB 2.0)

Related product manuals