Yealink SIP-T54W Administrator's Guide

Phone Customization
265
Default
0
Web UI
Dsskey > Programmable Key > Line
Parameter
programablekey.X.line
[1]
<y0000000000xx>.cfg
Description
It configures the desired line to apply the programmable key feature.
Permitted
Values
T57W/T54W/T48U/T48S/T48G/T46U/T46S/T46G/T29G: 0, 1-16;
T53W/T53/T43U/T42U/T42S/T42G: 0, 1-12;
T41P/T41S/T27G: 0, 1-6;
T40P/T40G/T23P/T23G: 0, 1-3;
T21(P) E2: 0, 1-2;
CP920: 1, 101, 102.
0-All (it is configurable only when "features.fwd_mode" is set to 1 (Custom) and "pro-
gramablekey.X.type" is set to 2 (Forward)).
1-Line 1
2-Line 2
…
16-Line 16
101-PSTN1
102-PSTN2
Default
1
Supported
Devices
All phones except T19(P) E2
Web UI
Dsskey > Programmable Key > Line
Parameter
programablekey.X.value
[1]
<y0000000000xx>.cfg
Description
It configures the value for some programmable key features.
For example, when you assign the Speed Dial to the programmable key, this parameter is used to spe-
cify the contact number you want to dial out. It is also used to specify the contact number with the
DTMF sequence. The contact number and DTMF sequence are separated by commas.
Permitted
Values
String within 99 characters
Default
Blank
Web UI
Dsskey > Programmable Key > Value
Parameter
programablekey.X.label
[1]
(X=1-4)
<y0000000000xx>.cfg
Description
It configures the label displayed on the phone screen for a specific programmable key.
This is an optional configuration.
Permitted
Values
String within 99 characters
Default
Blank

Yealink SIP-T54W Specifications

General

Connectivity	Dual-port Gigabit Ethernet
SIP Accounts	16
Opus Codec Support	Yes
Audio Features	HD voice with Yealink Acoustic Shield technology
Expansion Module	Supports up to 3 EXP50 expansion modules
Power over Ethernet (PoE)	Yes
Headset Support	Yes, RJ9 headset port, USB headset support, Bluetooth headset support
Resolution	480 x 272 pixels
Bluetooth	Yes, Bluetooth 4.2
USB Ports	2 (USB 2.0)