Yealink SIP-T54W Administrator's Guide

Account Settings
314
Default
1
Supported
Devices
All phones except T19(P) E2 and CP920
Parameter
account.X.phone_setting.call_appearance.transfer_via_new_
linekey
[1]
<MAC>.cfg
Description
It enables or disables to distribute a transferring call to a new line key (the new line key is not seized)
for account X.
If all line keys are seized, the current line key will be used.
Note: The number of the line keys is determined by “account.X.number_of_linekey”. The value con-
figured by this parameter takes precedence over that configured by the parameter “phone_set-
ting.call_appearance.transfer_via_new_linekey”.
Permitted
Values
0-Disabled, the phone will transfer a call on the current line key.
1-Enabled
Default
Blank
Supported
Devices
All phones except T19(P) E2 and CP920
Parameter
phone_setting.call_appearance.conference_via_new_linekey <y0000000000xx>.cfg
Description
It enables or disables to distribute a conference call to a new line key (the new line key is not seized).
If all line keys are seized, the current line key will be used.
Note: The number of the line keys is determined by “account.X.number_of_linekey”. The value con-
figured by the parameter “account.X.phone_setting.call_appearance.conference_via_new_linekey”
takes precedence over that configured by this parameter.
Permitted
Values
0-Disabled, the phone will place a new call using the current line key when pressing the Conf/Con-
ference soft key.
1-Enabled, the phone will place a new call by automatically selecting a new line key (the cor-
responding line key is not seized) when pressing the Conf/Conference soft key. If all line keys are
seized, the current line key will be used.
Default
1
Supported
Devices
All phones except T19(P) E2 and CP920
Parameter
account.X.phone_setting.call_appearance.conference_via_new_
linekey
[1]
<MAC>.cfg
Description
It enables or disables to distribute a conference call to a new line key (the new line key is not seized)
for account X.
If all line keys are seized, the current line key will be used.
Note: The number of the line keys is determined by “account.X.number_of_linekey”. The value con-
figured by this parameter takes precedence over that configured by the parameter “phone_set-
ting.call_appearance.conference_via_new_linekey”.
Permitted
Values
0-Disabled, the phone will place a new call using the current line key when pressing the Conf/Con-
ference soft key.
1-Enabled, the phone will place a new call by automatically selecting a new line key (the cor-
responding line key is not seized) when pressing the Conf/Conference soft key. If all line keys are
seized, the current line key will be used.

Yealink SIP-T54W Specifications

General

Connectivity	Dual-port Gigabit Ethernet
SIP Accounts	16
Opus Codec Support	Yes
Audio Features	HD voice with Yealink Acoustic Shield technology
Expansion Module	Supports up to 3 EXP50 expansion modules
Power over Ethernet (PoE)	Yes
Headset Support	Yes, RJ9 headset port, USB headset support, Bluetooth headset support
Resolution	480 x 272 pixels
Bluetooth	Yes, Bluetooth 4.2
USB Ports	2 (USB 2.0)