Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
532
place a new call.
Default
1
Parameter
phone_setting.end_call_net_disconnect.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to end the call if the network is unavailable during the call.
Permitted
Values
0-Disabled
1-Enabled, the phone will end the call and go to the Idle screen after 5 seconds.
Default
0
Parameter
features.station_name.value <y0000000000xx>.cfg
Description
It configures station name to be displayed on the top-left corner of the LCD screen.
Note: The text displayed might be truncated if “features.station_name.scrolling_display” is set to 0
(Disabled). For T43U/T42G/T42S/T42U/T41P/T41S/T27G phones, the station name is displayed in the
middle bottom of the idle screen.
Permitted
Values
Blank (the label of the default account will be displayed)
String
Default
Blank
Parameter
features.station_name.scrolling_display <y0000000000xx>.cfg
Description
It enables or disables the phone to scroll the string display on the top-left corner of the LCD screen.
Permitted
Values
0-Disabled
1-Enabled
Default
1
Parameter
phone_setting.incoming_call.reject.enable <y0000000000xx>.cfg
Description
It enables or disables the user to manually reject an incoming call on the phone.
Permitted
Values
0-Disabled, the Reject soft key disappears from the incoming call screen; pressing X/Mute key, tap
the on-hook key or using action URI to reject the call is not permitted.
1-Enabled
Default
1
Parameter
features.call_out_directory_by_off_hook.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to automatically dial out the selected contact from Directory once you
press the off-hook key.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Supported
Devices
CP920
Parameter
features.ok_key.talking.mode <y0000000000xx>.cfg
To Next Page
Loading...
Need help?
General
