Yealink SIP VP-T49G

Yealink IP Phone XML Configurations
101
The valid values must be within 512 characters. Each IP address or domain name
is separated by a comma. If this field is left blank or the value is set as “any”, the
phone will reject HTTP POST messages from any server.
4. Click Confirm to accept the change.
To configure the Push XML Server using configuration files:
1. Add/Edit the Push XML Server parameters in configuration files.
The following table shows the information of parameters:
Parameter
Permitted Values
Default
push_xml.server
IP address
Blank
Description:
Configures the IP address of the push XML server.
Note: Each IP address or domain name is separated by a comma. If this field
is left blank or the value is set as “any”, the phone will reject HTTP POST
messages from any server.
Web User Interface:
Features->Remote Control->Push XML Server IP Address
Phone User Interface:
None
The following shows an example of configuring push XML server using
configuration files:
push_xml.server = 10.3.6.158
2. Upload configuration files to the root directory of the provisioning server and
trigger IP phones to perform an auto provisioning for configuration update. For
more information on auto provisioning, refer to Yealink_SIP-T2_Series_T19(P)
E2_T4_Series_CP860_IP_Phones_Auto_Provisioning_Guide .