To Next Page

To Previous Page

DIAL PLAN Configuration

Field name

explanation

Basic Setting

Press "#" to Send

Set Enable/Disable the phone ended with “#” dial.

Dial Fixed Length

Specify the Fixed Length of phone ending with.

Send after （3-30）

seconds

Set the timeout of the last dial digit. The call will be

sent after timeout.

Press # to Do Blind

Transfer

Enable Blind Transfer On Hook, when executing Blind

Transfer End with #, press # after inputting the number

that you want to transfer, the phone will transfer the

current call to the third party

Blind Transfer on

OnHook

Enable Blind Transfer on On Hook, when executing

Blind Transfer, hang up after inputting the number that

you want to transfer, the phone will transfer the current

call to the third party

Attend Transfer on

OnHook

Enable Attend Transfer on On Hook, when executing

Attended Transfer, hang up after the third party

answers, the phone will transfer the current call to the

third party

Below is user-defined digital map rule:

[] Specifies a range that will match digit. May be a range, a list of ranges

separated by commas, or a list of digits.

* Match any single digit that is dialed.

. Match any arbitrary number of digits including none.

Tn Indicates an additional time out period before digits are sent of n seconds

in length. n is mandatory and can have a value of 0 to 9 seconds. Tn must be

Yealink T26 User Manual

Other manuals for Yealink T26