Yealink T27P - Page 147

Configuring Basic Features
133
Details of Configuration Parameters:
Parameters
Permitted Values
Default
dialplan.replace.prefix.X
(X ranges from 1 to 100)
String within 32 characters
Blank
Description:
Configures the entered number to be replaced.
Example:
dialplan.replace.prefix.1 = 00
Web User Interface:
Settings->Dial Plan->Replace Rule->Prefix
Phone User Interface:
None
dialplan.replace.replace.X
(X ranges from 1 to 100)
String within 32 characters
Blank
Description:
Configures the alternate number to replace the entered number.
Example:
dialplan.replace.replace.1 = 123456
Web User Interface:
Settings->Dial Plan->Replace Rule->Replace
Phone User Interface:
None
dialplan.replace.line_id.X
(X ranges from 1 to 100)
Refer to the following content
Blank (for
all lines)
Description:
Configures the desired line to apply the replace rule. The digit 0 stands for all lines. If
it is left blank, the replace rule will apply to all lines on the IP phone.
Permitted Values:
0 to 16 (for SIP-T48G/T46G/T29G)
0 to 12 (for SIP-T42G)
0 to 6 (for SIP-T41P/T27P)
0 to 3 (for SIP-T23P/G)
0 to 2 (for SIP-T21(P) E2)
Example:
dialplan.replace.line_id.1 = 1,2