Yealink T27P Administrator's Guide

Configuring Basic Features
229
Parameters
Permitted Values
Default
None
transfer.on_hook_trans_enable
0 or 1
1
Description:
Enables or disables the IP phone to complete the semi-attended/attended transfer
through on-hook besides pressing the Transfer/Tran soft key or TRAN/TRANSFER key.
0-Disabled
1-Enabled
Web User Interface:
Features->Transfer->Attend Transfer On Hook
Phone User Interface:
None
transfer.semi_attend_tran_enable
0 or 1
1
Description:
Enables or disables the transferee party’s phone not to prompt a missed call on the
LCD screen before displaying the caller ID when performing a semi-attended
transfer.
0-Disabled
1-Enabled
Web User Interface:
Features->Transfer->Semi-Attend Transfer
Phone User Interface:
None
To configure call transfer via web user interface:
1. Click on Features->Transfer.

Yealink T27P Specifications

General

Wall Mountable	Yes
Local Phonebook	1000 entries
Bluetooth	No
Wi-Fi	No
Gigabit Ethernet	No
Display	3.66" 240x120 pixel graphical LCD with backlight
Audio Features	HD voice, Full-duplex speakerphone
Network	Dual-port 10/100 Ethernet switch
Protocols	SIP v1 (RFC2543), v2 (RFC3261)
Power	IEEE 802.3af PoE
Connectivity	2 x RJ45 10/100M Ethernet ports
Voice Codecs	G.711(A/μ), G.722, G.723, G.729AB, G.726
EHS	Supports EHS with Plantronics headsets
Headset Port	Yes
Power Adapter	5V DC (optional)