Yealink T27P - Page 259

Configuring Basic Features
245
Configure group call pickup feature on
a phone basis.
Navigate to:
http://<phoneIPAddress>/servlet?p=fe
atures-callpickup&q=load
Configure the group call pickup code
on a per-line basis.
Navigate to:
http://<phoneIPAddress>/servlet?p=a
ccount-adv&q=load&acc=0
Phone User Interface
Assign a group call pickup key.
Details of Configuration Parameters:
Parameters
Permitted Values
Default
features.pickup.group_pickup_enable
0 or 1
0
Description:
Enables or disables the IP phone to display the GPickup soft key when the IP phone
is in the pre-dialing screen.
0-Disabled
1-Enabled
Web User Interface:
Features->Call Pickup->Group Call Pickup
Phone User Interface:
None
account.X.group_pickup_code
String within 32 characters
Blank
Description:
Configures the group pickup code for account X.
X ranges from 1 to 16 (for SIP-T48G/T46G/T29G).
X ranges from 1 to 12 (for SIP-T42G).
X ranges from 1 to 6 (for SIP-T41P/T27P).
X ranges from 1 to 3 (for SIP-T23P/G).
X ranges from 1 to 2 (for SIP-T21(P) E2).
Example:
account.1.group_pickup_code = *69
Note: The group call pickup code configured on a per-line basis takes precedence