Yealink T27P - Page 291

Configuring Basic Features
277
Parameters
Permitted Values
Default
0.
For SIP-T23P/T23G/T21(P) E2 IP phones:
The default value is 15.
Web User Interface:
DSSKey->Line key->Type
Phone User Interface:
Menu->Features->DSS Keys->Line Key X->Type
linekey.X.line
Refer to the following
content
1-16 for lines 1-16
Description:
Configures the desired line to apply the intercom key.
X ranges from 1 to 29 (for SIP-T48G).
X ranges from 1 to 27 (for SIP-T46G/T29G).
X ranges from 1 to 15 (for SIP-T42G/T41P).
X ranges from 1 to 21 (for SIP-T27P).
X ranges from 1 to 3 (for SIP-T23P/G)
X ranges from 1 to 2 (for SIP-T21(P) E2).
Permitted Values:
1 to 16 (for SIP-T48G/T46G/T29G)
1 to 12 (for SIP-T42G)
1 to 6 (for SIP-T41P/T27P)
1 to 3 (for SIP-T23P/G)
1 to 2 (for SIP-T21(P) E2)
1-Line 1
2-Line 2
…
16-Line 16
Example:
linekey.1.line = 1
Web User Interface:
DSSKey->Line key->Line
Phone User Interface:
Menu->Features->DSS Keys->Line Key X->Account ID
linekey.X.value
String within 99
characters
Blank