Yealink T27P - Page 381

Configuring Advanced Features
367
The following table lists pre-defined variable values.
Variable Value
Description
$mac
The MAC address of the IP phone
$ip
The IP address of the IP phone
$model
The IP phone model
$firmware
The firmware version of the IP phone
$active_url
The SIP URI of the current account when the IP phone
places a call, receives an incoming call or establishes
a call.
$active_user
The user part of the SIP URI for the current account
when the IP phone places a call, receives an incoming
call or establishes a call.
$active_host
The host part of the SIP URI for the current account
when the IP phone places a call, receives an incoming
call or establishes a call.
$local
The SIP URI of the caller when the IP phone places a
call.
The SIP URI of the callee when the IP phone receives
an incoming call.
$remote
The SIP URI of the callee when the IP phone places a
call.
The SIP URI of the caller when the IP phone receives
an incoming call.
$display_local
The display name of the caller when the IP phone
places a call.
The display name of the callee when the IP phone
receives an incoming call.
$display_remote
The display name of the callee when the IP phone
places a call.
The display name of the caller when the IP phone
receives an incoming call.
$call_id
The call-id of the active call.
Procedure
Action URL can be configured using the configuration files or locally.
Configuration File
<y0000000000xx>.cfg
Configure action URL.
Parameters: