Yealink T27P - Page 436

Administrator’s Guide for SIP-T2_Series_T4_Series IP Phones
422
Local
Web User Interface
Configure VPN feature and upload a
TAR package to the IP phone.
Navigate to:
http://<phoneIPAddress>/servlet?p
=network-adv&q=load
Phone User Interface
Configure VPN feature.
Details of Configuration Parameters:
Parameters
Permitted Values
Default
network.vpn_enable
0 or 1
0
Description:
Enables or disables OpenVPN feature on the IP phone.
0-Disabled
1-Enabled
Note: If you change this parameter, the IP phone will reboot to make the change
take effect.
Web User Interface:
Network->Advanced->VPN->Active
Phone User Interface:
None
openvpn.url
URL within 511 characters
Blank
Description:
Configures the access URL of the *.tar file for OpenVPN.
Example:
openvpn.url = http://192.168.10.25/OpenVPN.tar
Web User Interface:
Network->Advanced->VPN->Upload VPN Config
Phone User Interface:
None
To upload a TAR file and configure VPN via web user interface:
1. Click on Network->Advanced.
2. Click Browser to locate the TAR file from the local system.