Yealink T27P Administrator's Guide

Configuring Advanced Features
427
able
phone_setting.vq_rtcpxr_display_local_call_id.
enable
phone_setting.vq_rtcpxr_display_remote_call_
id.enable
phone_setting.vq_rtcpxr_display_local_codec.
enable
phone_setting.vq_rtcpxr_display_remote_cod
ec.enable
phone_setting.vq_rtcpxr_display_jitter.enable
phone_setting.vq_rtcpxr_display_jitter_buffer_
max.enable
phone_setting.vq_rtcpxr_display_packets_lost.
enable
phone_setting.vq_rtcpxr_display_symm_onew
ay_delay.enable
phone_setting.vq_rtcpxr_display_round_trip_d
elay.enable
phone_setting.vq_rtcpxr_display_moslq.enabl
e
phone_setting.vq_rtcpxr_display_moscq.enabl
e
<MAC>.cfg
Configure the central report collector.
Parameters:
account.X.vq_rtcpxr.collector_name
account.X.vq_rtcpxr.collector_server_host
account.X.vq_rtcpxr.collector_server_port
Local
Web User
Interface
Configure VQ-RTCPXR.
Configure the phone to display RTP status
showing the voice quality report of the last call
on the web user interface.
Configure the phone to display RTP status
showing the voice quality report of the last call
or the current call on the phone user interface.
Configure the options of the RTP status
displayed on the phone user interface.
Navigate to:
http://<phoneIPAddress>/servlet?p=settings-v
oicemonitoring&q=load

Yealink T27P Specifications

General

Wall Mountable	Yes
Local Phonebook	1000 entries
Bluetooth	No
Wi-Fi	No
Gigabit Ethernet	No
Display	3.66" 240x120 pixel graphical LCD with backlight
Audio Features	HD voice, Full-duplex speakerphone
Network	Dual-port 10/100 Ethernet switch
Protocols	SIP v1 (RFC2543), v2 (RFC3261)
Power	IEEE 802.3af PoE
Connectivity	2 x RJ45 10/100M Ethernet ports
Voice Codecs	G.711(A/μ), G.722, G.723, G.729AB, G.726
EHS	Supports EHS with Plantronics headsets
Headset Port	Yes
Power Adapter	5V DC (optional)