Yealink T27P - Page 445

Configuring Advanced Features
431
Parameters
Permitted
Values
Default
1-Enabled
Web User Interface:
Settings->Voice Monitoring->Display Report options on Web
Phone User Interface:
None
phone_setting.vq_rtcpxr.states_show_on_gui.enable
0 or 1
0
Description:
Enables or disables the voice quality data of the last call or current call to be
displayed on the LCD screen. You can view the voice quality data of the last call by
pressing Menu->Status->RTP Status. You can view the voice quality data of the
current call by pressing RTP Status soft key during a call.
0-Disabled
1-Enabled
Web User Interface:
Settings->Voice Monitoring->Display Report options on phone
Phone User Interface:
None
phone_setting.vq_rtcpxr_display_start_time.enable
0 or 1
1
Description:
Enables or disables the phone to display Start Time on the LCD screen.
0-Disabled
1-Enabled
Note: It works only if the parameter
“phone_setting.vq_rtcpxr.states_show_on_gui.enable” is set to “1”.
Web User Interface:
Settings->Voice Monitoring->Report options on phone UI->Start Time
Phone User Interface:
None
phone_setting.vq_rtcpxr_display_stop_time.enable
0 or 1
1
Description:
Enables or disables the phone to display Current Time or Stop Time on the LCD
screen.