Yealink T27P - Page 448

Administrator’s Guide for SIP-T2_Series_T4_Series IP Phones
434
Parameters
Permitted
Values
Default
phone_setting.vq_rtcpxr_display_jitter_buffer_max.enable
0 or 1
1
Description:
Enables or disables the phone to display JitteBufferMax on the LCD screen.
0-Disabled
1-Enabled
Note: It works only if the parameter
“phone_setting.vq_rtcpxr.states_show_on_gui.enable” is set to “1”.
Web User Interface:
Settings->Voice Monitoring->Report options on phone UI->JitteBufferMax
Phone User Interface:
None
phone_setting.vq_rtcpxr_display_packets_lost.enable
0 or 1
1
Description:
Enables or disables the phone to display Packet lost on the LCD screen.
0-Disabled
1-Enabled
Note: It works only if the parameter
“phone_setting.vq_rtcpxr.states_show_on_gui.enable” is set to “1”.
Web User Interface:
Settings->Voice Monitoring->Report options on phone UI->Packet lost
Phone User Interface:
None
phone_setting.vq_rtcpxr_display_symm_oneway_delay.ena
ble
0 or 1
0
Description:
Enables or disables the phone to display SymmOneWayDelay on the LCD screen.
0-Disabled
1-Enabled
Note: It works only if the parameter
“phone_setting.vq_rtcpxr.states_show_on_gui.enable” is set to “1”.
Web User Interface:
Settings->Voice Monitoring->Report options on phone UI->SymmOneWayDelay