Yealink T27P - Page 452

Administrator’s Guide for SIP-T2_Series_T4_Series IP Phones
438
To configure interval report for VQ RTCP-XR via web user interface:
1. Click on Settings->Voice Monitoring.
2. Select the desired value from the pull-down list of VQ RTCP-XR Interval Report.
3. Enter the desired value in the Period for Interval Report field.
4. Click Confirm to accept the change.
To configure alert report for VQ RTCP-XR via web user interface:
1. Click on Settings->Voice Monitoring.
2. Enter the desired value in the Warning threshold for Moslq field.
3. Enter the desired value in the Critical threshold for Moslq field.
4. Enter the desired value in the Warning threshold for Delay field.