Administrator’s Guide for SIP-T2_Series_T4_Series IP Phones
440
3. Click Confirm to accept the change.
The RTP status will appear on the web user interface at the path: Status.
To configure RTP status displayed on the LCD screen via web user interface:
1. Click on Settings->Voice Monitoring.
2. Select the desired value from the pull-down list of Display Report options on phone.
3. Click Confirm to accept the change.
The RTP status will appear on the phone user interface at the path:
Menu->Status->More….
To configure the options of the RTP status displayed on the LCD screen via web user
interface:
1. Click on Settings->Voice Monitoring.
2. In the Report options on phone UI block, select the desired list from the Disabled
To Next Page
Loading...
