Yealink T27P Administrator's Guide

Administrator’s Guide for SIP-T2_Series_T4_Series IP Phones
48
files.
Procedure
PC port mode can be configured using the configuration files or locally.
Configuration File
<y0000000000xx>.cfg
Configure the PC port.
Parameter:
network.pc_port.enable
Local
Web User Interface
Configure the PC port mode.
Navigate to:
http://<phoneIPAddress>/servlet
?p=network-pcport&q=load
Details of Configuration Parameters:
Parameters
Permitted Values
Default
network.pc_port.enable
0 or 1
1
Description:
Enables or disables the PC (LAN) port.
0-Disabled
1-Auto Negotiate
Note: If you change this parameter, the IP phone will reboot to make the change take
effect.
Web User Interface:
Network->PC Port->PC Port Active
Phone User Interface:
None
To enable the PC port via web user interface:
1. Click on Network->PC Port.

Yealink T27P Specifications

General

Wall Mountable	Yes
Local Phonebook	1000 entries
Bluetooth	No
Wi-Fi	No
Gigabit Ethernet	No
Display	3.66" 240x120 pixel graphical LCD with backlight
Audio Features	HD voice, Full-duplex speakerphone
Network	Dual-port 10/100 Ethernet switch
Protocols	SIP v1 (RFC2543), v2 (RFC3261)
Power	IEEE 802.3af PoE
Connectivity	2 x RJ45 10/100M Ethernet ports
Voice Codecs	G.711(A/μ), G.722, G.723, G.729AB, G.726
EHS	Supports EHS with Plantronics headsets
Headset Port	Yes
Power Adapter	5V DC (optional)