Yealink T27P Administrator's Guide

Configuring Basic Features
63
Details of Configuration Parameters:
Parameters
Permitted
Values
Default
features.voice_mail_popup.enable
0 or 1
1
Description:
Enables or disables the IP phone to display the pop-up message box when it receives
a new voice mail.
0-Disabled
1-Enabled
Note: If the voice mail pop-up message box disappears, it won't pop up again unless
the user receives a new voice mail or the user re-registers the account that has unread
voice mail(s).
Web User Interface:
Features->Notification Popups->Display Voice Mail Popup
Phone User Interface:
None
features.missed_call_popup.enable
0 or 1
1
Description:
Enables or disables the IP phone to display the pop-up message box when it misses a
call.
0-Disabled
1-Enabled
Web User Interface:
Features->Notification Popups->Display Missed Call Popup
Phone User Interface:
None
features.forward_call_popup.enable
0 or 1
1
Description:
Enables or disables the IP phone to display the pop-up message box when it forwards
an incoming call to other party.
0-Disabled
1-Enabled
Web User Interface:
Features->Notification Popups->Display Forward Call Popup

Yealink T27P Specifications

General

Wall Mountable	Yes
Local Phonebook	1000 entries
Bluetooth	No
Wi-Fi	No
Gigabit Ethernet	No
Display	3.66" 240x120 pixel graphical LCD with backlight
Audio Features	HD voice, Full-duplex speakerphone
Network	Dual-port 10/100 Ethernet switch
Protocols	SIP v1 (RFC2543), v2 (RFC3261)
Power	IEEE 802.3af PoE
Connectivity	2 x RJ45 10/100M Ethernet ports
Voice Codecs	G.711(A/μ), G.722, G.723, G.729AB, G.726
EHS	Supports EHS with Plantronics headsets
Headset Port	Yes
Power Adapter	5V DC (optional)