Yealink T27P Administrator's Guide

Administrator’s Guide for SIP-T2_Series_T4_Series IP Phones
76
Details of Configuration Parameters:
Parameters
Permitted Values
Default
phone_setting.contact_photo_display.enable
0 or 1
1
Description:
Enables or disables the IP phone to display contact avatar when it receives an
incoming call, dials an outgoing call or engages in a call.
0-Disabled
1-Enabled
Note: It is only applicable to SIP-T48G/T46G/T29G IP phones.
Web User Interface:
Settings->Call Display->Display Contact Photo
Phone User Interface:
None
phone_setting.called_party_info_display.enable
0 or 1
0
Description:
Enables or disables the IP phone to display the called account information when
receiving an incoming call.
0-Disabled
1-Enabled
Web User Interface:
Settings->Call Display->Display Called Party Information
Phone User Interface:
None
phone_setting.call_info_display_method
Integer from 0 to 4
0
Description:
Specifies the call information display method when the IP phone receives an
incoming call, dials an outgoing call or engages in a call.
0-Name+Number
1-Number+Name
2-Name
3-Number
4-Full Contact Info (display name<sip:xxx@domain.com>)
Web User Interface:

Yealink T27P Specifications

General

Wall Mountable	Yes
Local Phonebook	1000 entries
Bluetooth	No
Wi-Fi	No
Gigabit Ethernet	No
Display	3.66" 240x120 pixel graphical LCD with backlight
Audio Features	HD voice, Full-duplex speakerphone
Network	Dual-port 10/100 Ethernet switch
Protocols	SIP v1 (RFC2543), v2 (RFC3261)
Power	IEEE 802.3af PoE
Connectivity	2 x RJ45 10/100M Ethernet ports
Voice Codecs	G.711(A/μ), G.722, G.723, G.729AB, G.726
EHS	Supports EHS with Plantronics headsets
Headset Port	Yes
Power Adapter	5V DC (optional)