Yealink T27P Administrator's Guide

Configuring Basic Features
79
Parameters
Permitted Values
Default
wui.https_enable
0 or 1
1
Description:
Enables or disables the user to access web user interface of the IP phone using
HTTPS protocol.
0-Disabled
1-Enabled
Note: If you change this parameter, the IP phone will reboot to make the change take
effect.
Web User Interface:
Network->Advanced->Web Server->HTTPS
Phone User Interface:
Menu->Settings->Advanced Settings (default password: admin)
->Network->Webserver Type->HTTPS Status
network.port.https
Integer from 1 to 65535
443
Description:
Configures the HTTPS port for the user to access web user interface of the IP phone
using the HTTPS protocol.
Note: If you change this parameter, the IP phone will reboot to make the change take
effect.
Web User Interface:
Network->Advanced->Web Server->HTTPS Port (1~65535)
Phone User Interface:
Menu->Settings->Advanced Settings (default password: admin)
->Network->Webserver Type->HTTPS Port
To configure web server type via web user interface:
1. Click on Network->Advanced.
2. Select the desired value from the pull-down list of HTTP.
3. Enter the HTTP port number in the HTTP Port (1~65535) field.
The default HTTP port number is 80.
4. Select the desired value from the pull-down list of HTTPS.
5. Enter the HTTPS port number in the HTTPS Port (1~65535) field.

Yealink T27P Specifications

General

Wall Mountable	Yes
Local Phonebook	1000 entries
Bluetooth	No
Wi-Fi	No
Gigabit Ethernet	No
Display	3.66" 240x120 pixel graphical LCD with backlight
Audio Features	HD voice, Full-duplex speakerphone
Network	Dual-port 10/100 Ethernet switch
Protocols	SIP v1 (RFC2543), v2 (RFC3261)
Power	IEEE 802.3af PoE
Connectivity	2 x RJ45 10/100M Ethernet ports
Voice Codecs	G.711(A/μ), G.722, G.723, G.729AB, G.726
EHS	Supports EHS with Plantronics headsets
Headset Port	Yes
Power Adapter	5V DC (optional)