Yealink T42G Quick Reference Guide

Yealink T42G Quick Reference Guide : 7
FEATURE ACCESS CODES
These access codes allow you redirect calls on your phone as required. To use these features
simply dial required feature and press send. If you are not at your phone you can alter these
setting via the smartconnect.alltel.com.au or Communicator on your mobile.
Dialpad
FEATURE TURN ON TURN OFF
New Call *72 Destination Number # *73
Call Forward Always To
Voicemail
*21 #21
Call Forward No Answer *92 Destination Number # *93
Call Forward No Answer
Rings
* 610 then rings required #
Call Forward No Answer
To Voicemail
*41 #41
Call Forward Busy *90 Destination Number # *91
Call Forward Busy to
Voicemail
*40 #40

Yealink T42G Specifications

General

Power requirements	100-240V, DC 5V
Power over Ethernet (PoE)	Yes
Touchscreen	-
Display diagonal	2.7 \
Display resolution	192 x 64 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	3
Voice codecs	G.711, G.723, G.729A, G.729B
Bluetooth	No
RJ-9 ports quantity	2
Ethernet LAN (RJ-45) ports	1
Storage temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black, Grey
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	175 mm
Width	212 mm
Height	189 mm