Yealink T46S - Answering Calls; Transferring Calls

You can also dial the number first, and then choose the way you want to speak to the other party.
You can also search and dial a contact from call history, local directory or remote phone book. During a call,
you can alternate between Speakerphone, Headset, or Handset mode by pressing the Speakerphone key, the
Headset key, or picking up the handset.
To place a call using the handset:
1. Pick up the handset.
2. Enter the desired number using the keypad.
3. Press , , or the Send soft key.
To place a call using the headset:
With the optional headset connected, press to activate the headset mode.
1. Press the line key to obtain a dial tone.
2. Enter the desired number using the keypad.
3. Press , , or the Send soft key.
With the optional headset connected, press to activate the headset mode.
1. Enter the desired number using the keypad.
2. Press , , or the Send soft key.
Answering Calls
To answer a call using the handset:
1. Pick up the handset.
To answer a call using the hands-free speakerphone mode:
1. Press .
2. With the handset on-hook and the headset mode deactivated, press the Answer soft key.
3. With the handset on-hook and the headset mode deactivated, press the line key (the line key LED
flashes green).
To answer a call using the headset:
1. Press .
2. With the headset mode activated, press the Answer soft key.
3. With the headset mode activated, press the line key (the line key LED flashes green).
Transferring Calls
You can transfer a call to another party in one of the three ways:
• Blind Transfer: Transfer a call directly to another party without consulting.
• Semi-Attended Transfer: Transfer a call when the target phone is ringing.
• Attended Transfer: Transfer a call with prior consulting.
To perform a blind transfer:
1. Press the Tran soft key during a call.
2. Enter the number you want to transfer the call to.