Yealink T48G Manual

6
www.vanillaip.com
2. With the handset on hook, enter the desired number using the keypad, press the
speaker button, ok or the send soft key
 ANSWERING A CALL
When you are not in another call, you can answer a call in three ways
- Using the handset
- Using the speaker phone
- Using the headset
ANSWERING WHEN NOT IN ANOTHER CALL
Call duration and destination will always appear on the LCD screen for the active call
To answer a call using the handset
1. Pick up the handset
To answer a call when using the hands-free speakerphone mode
Do one of the following
1. Press the speaker phone button
2. With the handset on hook and the headset mode deactivated press the answer soft
key
3. With the handset on hook and the headset mode deactivated, press the link key [the
line key LED flashes green]
To answer a call using the headset
Do one of the following
1. Press the headset button
2. With the headset mode activated press the answer soft key
3. With the headset mode activated, press the line key [the line key LED flashes green]
Answering when in another call
If you have an activate call, and an incoming call arrives on the phone, do one of the following

Yealink T48G Specifications

General

Wi-Fi	No
Display	7" 800 x 480-pixel color touch screen
Network	Dual-port Gigabit Ethernet
PoE	Yes (IEEE 802.3af)
Audio Features	HD voice: HD handset, HD speaker
Voice Codecs	G.722, G.711(A/μ), G.729AB, G.726
Network Features	SIP v1 (RFC2543), v2 (RFC3261)
Bluetooth	Bluetooth via USB Dongle
USB	1 x USB 2.0
Headset	Yes (EHS support)
Expansion Module	Supports up to 6 modules
Local Phonebook	1000 entries
Power Supply	AC 100~240V input, DC 5V/2A output
Supported Languages	English, French, German, Italian, Polish, Portuguese, Russian, Spanish
Operating Temperature	0 ~ 40°C (+32 ~ 104°F)
Humidity	10% to 95%, non-condensing
Dimensions	266 x 226 x 185 mm