Yealink VP-2009

IP Video Phone Using the Basic Call Functions
- 50 -
Note:
Please contact your system administrator for the connecting code. Different systems
have different codes.
To retrieve the new voicemail via phone interface:
1) Click the Message icon directly.
2) You may be prompted to enter the password which is needed to connect to your
VoIP telephony system. It depends on your system.
3) Your voice mailbox is called and you are able to listen to your new and old
messages.
To configure Voicemail Number via phone interface:
1) In desktop status, click Call Feature->Voice Mail to enter; You can also click the
Message icon to enter the configuration page directly when the phone is idle.
2) Users can check the register status of each account, and the number of received
voice mail in this page.
3) Choose an account, and enter the voicemail concatenated code then press <F1> to
save your changes, or press the icon behind to connect to the server.
Note:
Before retrieving the new voicemail, please make sure that the connecting code has
been set on the phone.