IP Video Phone Using the Advanced Phone Functions
Advanced Settings
Select Account->Advanced page to set the advanced information via web interface:
The following table lists the instruction of the field about the advanced Account Setting.
Defines whether to active the phone UDP Keep-alive mechanism.
The default is Enabled.
This parameter specifies how often the phone will send a packet to
the SIP server. Default is 30 seconds.
This parameter specifies the time frequency that phone refreshes
its registration. The default interval is 3600 seconds.
Local SIP port. The default value is 5060.
The parameter allows you configuring the proxy to send responses
back to a particular address and port. The default is disabled.
This document defines an extension to the Session Initiation
Protocol (SIP). This extension allows for a periodic refresh of SIP
sessions through a re-INVITE or UPDATE request. The refresh
allows both user agents and proxies to determine if the SIP
session is still active.
You can only configure these settings via web interface.
1) Choose Account.
To Next Page
Loading...
