Maintenance Tasks
Administrator Mode
The phone allows two modes to configure the phone:
User Mode
Administrator Mode
Administrator mode grants unlimited access to the phone configuration on both web
and phone interface. User Mode can not set the parameters such as: Accounts, Network,
Factory , Reboot and some other phone settings by the Phone interface.
Administrator/User Password
Administrator mode grants unlimited access to the phone configuration on both web
and phone user interface. The administrator/user password is used to access:
Web interface along with user name.
The advance settings such as Network, Account, reboot, Factory Settings via
phone interface.
The default administrator password is admin. Meanwhile the user name for web
interface access is admin.
To change the administrator password via phone interface:
1) Click Setting->Security option to enter.
2) Choose and fill in the 【Old Password】, 【New Password】and【Re-enter】 input
frame.
3) Press <F1> to save the change, or press <F4> to cancel the operation and return
To Next Page
Loading...
