IP Video Phone Using the Advanced Phone Functions
2) If you choose Power On is On, it will update when the phone is on . And also you can
choose the fixed time to update , for example : Interval , Weekly , Time , Day of
week , ect
3) Click Confirm button, when configuration files are not automatically updated at the
same time.
4) You can also update immediately by pressing Autoprovision Now button.
The parameters of the Auto-provision：
The phone can be updated via TFTP, FTP ,HTTP or HTTPS.
If you choose TFTP as protocol TFTP, you need to enter the TFTP
server IP address and port.
You can specific the period that your phone checks the new
firmware from the server: Power on, Repeatedly, Weekly, Power
on + Repeatedly, Power on + Weekly and Disabled.
You can specific the period in days which the phone checks and
updates the new firmware, the range is 1-30 days.
Note:
1. Any power interruption during the following process will most likely lead to a flash
memory error. As a result the system cannot boot up anymore. The procedure can
only be conducted in Administrator Mode.
2. If you choose DHCP method , make sure your phone is also chosen DHCP.
3. If you choose the DHCP and URL On , it will choose DHCP at first .
Reboot
To reboot your device via phone interface:
1) Click Setting->Reboot option to enter configuration page.
To Next Page
Loading...
