IP Video Phone Using the Advanced Phone Functions
Firmware Update
The phone is delivered with pre-installed firmware which allows operating your phone
flawlessly. If you require updating the phone’s firmware please contact your system
administrator.
To update the firmware manually via web interface:
1) Choose Upgrade->Basic–>Browse, select the firmware file in your local computer.
2) Click Upgrade button to update the new firmware.
3) Please do not power off during the updating.
Note:
1. Any power interruption during the following process will most likely lead to a flash
memory error. As a result the system cannot boot up anymore. The procedure can
only be conducted in Administrator Mode.
2. If the updating is failed, you can re-plug the power adaptor, and press the <F2>
key for a few seconds, then it will show the Firmware Update, Please Wait…
Auto provision
To setting auto provision via Web interface:
1) Choose Upgrade->Advanced, configure the relating settings, It supports three
upgrade methods: PNP、 DHCP、URL . PNP include PNP Active ; DHCP include
DHCP Active and Custom Option ; URL include Server URL、Common AES
Key、MAC-Oriented AES Key .
To Next Page
Loading...
