Yealink VP-2009

IP Video Phone Using the Basic Call Functions
- 49 -
To Attended Transfer via phone interface:
1) A and B is on an conversation, A press the Transfer hot key to put B on hold, then
A can dial the third telephone number C and press the OK/SEND button or click
button to call out.
2) After C answered it, A and C can have a private conversation without B hearing it,
then A press the transfer hot key to complete the transfer.
3) A will be disconnected from the call. B can talk to C.
To Semi-Attend Transfer via phone interface:
1) A and B is on an conversation, A press the transfer hot key to put B on hold, then
A can dial a new number C and press the OK/SEND button or click button to
call out.
2) While C is ringing, A hang up or press the Transfer hot key. Then A will turn to hold
status, and the LCD will display as Transferred.
3) You will be disconnected from the call, when C pick up, B can talk to C.
Note:
Make sure that the SIP server you have registered supports this function.
Message
Your voice mailbox messages, which are usually stored on a media server of your local
or hosted VoIP telephony system, can be accessed from your phone.
New voice messages can be indicated both acoustically and visually as described below:
 The idle screen indicates a new voice messages coming.