Yealink W52H - Basic Call Features

Placing Calls
To place a call directly:
Enter the desired number when the handset is idle, and then press .
To place a call from the local directory:
1. Press when the handset is idle.
2. Press or to highlight the desired entry, and then press .
If both the office number and mobile number are stored, press or to highlight the desired number, and
then press again.
To place a call from the call history:
1. Press the History soft key, and then select the desired call history list.
2. Press or to highlight the desired entry, and then press .
To place a call from the redial number list:
1. Press when the handset is idle.
2. Press or to highlight the desired entry, and then press .
To place a call using the speed dial key:
Long press the speed dial key to place a call to the number assigned to it.
Answering Calls
To answer a call, do one of the following:
 Press the Accept soft key.
 Press .
 Press .
3. Press the Options soft key, and then select Edit.
4. Edit the values in the Name, Number and Mobile fields.
5. Press the Save soft key to accept the change.
To delete a contact:
1. Press the OK key to enter the main menu, and then select Directory.
2. Press or to highlight the desired entry.
3. Press the Options soft key, and then select Delete to delete the selected entry.
To assign a speed dial number:
1. Press the OK key to enter the main menu, and then select Settings->Telephony->Speed Dial.
2. Press or to highlight the desired speed dial key, and then press the Assign soft key.
3. Press or to highlight the desired entry, and then press the OK soft key.
If both the office number and mobile number are stored, press or to highlight the desired number, and
then press the OK soft key again.
Basic Call Features
Basic Call Features
Note: You can ignore an incoming call by pressing the Silence soft key or reject an incoming call by pressing .
Ending Calls
 Press .
ENGLISH
5