Yeastar Technology NeoGate TE100 User Manual

NeoGate TE100 Administrator Guide
www.yeastar.com Page 30
1) General
·UDP Port
Port use for sip registrations, Default is 5060.
·TCP Port
Port use for sip registrations, Default is 5060.
·TLS Port
Port use for sip registrations, Default is 5061.
·RTP Port Start
Beginning of RTP port range.
·RTP Port End
End of RTP port range.
·DTMF Mode
Set default mode for sending DTMF. Default setting: rfc2833.
·Max Registration/Subscription Time
Maximum duration (in seconds) of a SIP registration. Default is 3600 seconds.
·Min Registration/Subscription Time
Minimum duration (in seconds) of a SIP registration. Default is 60seconds.
·Default Incoming/Outgoing Registration Time
Default Incoming/Outgoing Registration Time: Default duration (in seconds) of
incoming/outgoing registration.
·Register Attempts
The number of SIP REGISTER messages to send to a SIP Registrar before giving up.
Default is 8 times.
·Register Timeout
Number of seconds to wait for a response from a SIP Registrar before timed out . Default
is 20 seconds.
·Calling Channel Codec Priority
Once enabled, when dialing out via SIP/SPS trunks, the codec of calling channel will be
selected in preference. If not, TE100 will follow the priority in your SIP/SPS trunks.
·DNS SRV Look Up
Please enable this option when your SIP trunk contains more than one IP address.

Yeastar Technology NeoGate TE100 Specifications

General

Brand	Yeastar Technology
Model	NeoGate TE100
Category	Switch
Language	English