NeoGate TE100 Administrator Guide
www.yeastar.com Page 36
6.2.4 General Preferences
This is the general preferences of TE100
Figure 6-14
·Ring Timeout
Number of seconds to ring a device before handling the call, default value is 30s.
.MAX call duration
The absolute maximum amount of time permitted for a call. A setting of 0 disables the
timeout. Default value is 6000s.
·HTTP bind port/Web Access Port
Port to use for HTTP sessions. Default: 80
Note: please reboot the system to take effect.
6.3 Routes Settings
There are two default routes to route the calls from E1 to SIP and SIP to E1.
In this page, we can route the call from one trunk to another trunk or a trunk group.
Figure 6-15
To Next Page
Loading...