NeoGate TE100 Administrator Guide
www.yeastar.com Page 15
are assigned to routes by routing protocols to provide measurable statistic which can be
used to judge how useful (how low cost) a route is.
·Interface
Define which internet port to go through.
2) Static Route Rules
You can add new static route rules here.
5.2 Firewall Settings
Firewalls are used to prevent unauthorized Internet users from accessing private
networks connected to the Internet, especially intranets. All messages entering or
leaving the intranet pass through the firewall, which examines each message and
blocks those that do not meet the specified security criteria.
5.2.1 Firewall Rules
Figure 5-5
1) General Settings
·Enable Firewall
Enable the firewall to protect the device. You should reboot the device to make the
firewall run successfully.
·Disable Ping
Enable this item; net ping from remote hosts will be dropped.
To Next Page
Loading...
Need help?
General
