NeoGate TE100 Administrator Guide
www.yeastar.com Page 40
6.3.2 Blacklist
Blacklist is used to block an incoming/outgoing call. If the number of incoming/outgoing
call is listed in the number blacklist, the caller will hear the following prompt: “The
number you have dialed is not in service. Please check the number and try again”. The
system will then disconnect the call.
Figure 6-18
We can add a number with the type: inbound, outbound or both
Figure 6-19
7. Logout
Click to log out safely to the log in page.
To Next Page
Loading...