Need help?Do you have a question about the Yeastar Technology P560 and is the answer not in the manual?
General| Model | P560 |
|---|---|
| Protocols | SIP, IAX2 |
| Network Interfaces | 2 |
| Firewall | Yes |
| FXO Ports | 8 |
| FXS Ports | 8 |
| Analog Ports | 8 |
| Audio Codecs | G.711, G.729, G.723, G.726, GSM, iLBC |
| VoIP Protocols | SIP, IAX2 |
| Transport Protocol | TCP, UDP, TLS |
| VPN | Yes |
| Power Supply | AC 100-240V, 50/60Hz |
| Operating Temperature | 0°C to 40°C |
| Humidity | 10% to 90% non-condensing |
| Storage Temperature | -20°C to 65°C (-4°F to 149°F) |
Details the front panel components and their functions for the Yeastar P550 model.
Describes the rear panel components and their functions for the Yeastar P550.
Guides on installing telephony modules for the Yeastar P550.
Instructions for connecting the PBX to the local network via Ethernet.
Steps to power on the PBX and verify system status.
Guides on connecting various telephony lines (FXS, FXO, BRI, E1/T1/J1).
Step-by-step guide on using NFC to change the PBX IP address.
To Next Page
