TA1600/2400/3200 User Manual
76/87
Figure 11-5 Set MyPBX as a DHCP Server
Then select DHCP mode on LAN settings page to make TA1600/2400/3200 as a
DHCP client.
Figure 11-6 Set TA1600/2400/3200 as a DHCP Client
Another way to do auto provision is to download configuration file from the configured
server URL. Fill in the URL, user name, password, and set the time,
TA1600/2400/3200 will get the configuration file from the server automatically and
regularly.
Note: if there is no user name and password for the server, leave these fields blank.
To Next Page
Loading...
