To Next Page

To Previous Page

- 47 -

3-5 Crankcase installation

Tightening the bolt a.

1. Follow the tightening sequence from 1 to 10 and tighten to a torque of 196 Nm

(2.0 kg•m)

2. Following the sequence, tighten the bolts one by one and then retighten to a

torque of 19.6 Nm

3. Following the tightening sequence, retighten the bolts to an angle of 56° to 61°.

Reference tightening torque: 35.0 Nm (3.5 kg•m)

Bolt b:24.0 Nm (2,4 kg•m)

Bolt c:12 Nm (1,2 kg•m)

This number signifies the tightening order

Questions and Answers:

Need help?

Do you have a question about the YEC ’04 YZF-R1 and is the answer not in the manual?

YEC ’04 YZF-R1 Specifications

General