14EN
OPERATE ROBOT
Before rst vacuuming, please make sure
ROBOT
is in the Charging Station
and fully charged� Short press to start cleaning and mapping�
Remove the Mopping Pad Plate/Module before mapping� When creating a map for the
rst time, please follow ROBOT to help eliminate some minor issues�
For example,
ROBOT
may get stuck under the furniture� Please refer to the
following solutions:
① Raise your low sitting furniture if possible;
② Cover the bottom of the furniture;
③ Set up Virtual Boundary via the App�
Note:
• Do not frequently remove washable mopping pads�
• Do not use a rag or any other object to scratch the Moping Pad Plate�
• When the YEEDI App prompts that the mops need to be replaced, please
replace them in time� Explore more accessories at YEEDI App or at https://www�
yeedi�com�
Short press
REGULAR MAINTENANCE
Maintenance Frequency
To ensure optimal performance, perform maintenance tasks and replace parts at
the following frequencies:
Note: Explore more accessories in the YEEDI App or at https://www�yeedi�com�
Part
Maintenance
Frequency
Replacement
Frequency
Washable Mopping Pads After each cleaning Every 1-2 months
Side Brush Every 2 weeks Every 3-6 months
Brush Every week Every 6-12 months
Filter Every week Every 3-6 months
Navigation Module
Obstacle Avoidance Module
Anti-drop Sensors
Carpet Detection Sensor
Edge Sensor
Bumper
Charging Contacts
Universal Wheel
Every week /
Dust Container After each cleaning Every 1-2 months
Dust Container Filter Every 3-6 months
Every 3-6 months/After
multiple washes