OPERATION
SAFETY PRECAUTIONS
Read entire operation section before
the WIRE FEEDER WELDER.
A WARNING
ELECTRIC SHOCK can kill.
• DO not touch electrically live parts such as
output terminals or internal wiring.
• Insulate yourself from the work and
ground.
• Always wear dry insulating gloves
FUMES AND GASES
can be dangerous.
• Keep your head out of fumes
• Use ventilation or exhaust to remove
fumes from breathing zone.
WELDING SPARKS
can cause fire or explosion
• Keep flammable material away.
• Do not weld on closed containers.
ARC RAYS can burn eyes and skin.
• Wear eye, ear and body protection.
operating
PRODUCT DESCRIPTION (PRODUCT CAPABILITIES)
This small portable wire feed welder is capable Of flux-cored
(FCAW) welding on steel, mild steel, stainless steel. The wire
feed welder is also capable Of STICK welding (SMAW) and
DC lift TIG welding (GTAW)
Self Shielding Flux-cored Welding does not require a sepa
rate shielding gas to protect the weld since the welding wire
has special additives known as flux to protect the weld until it
cools. Flux-cored welding is ideal for medium to thicker mate-
rial and if welding on painted or rusty steel. Flux-cored weld
ing is also ideal in outdoor applications Flux-cored welding
produces a good looking weld but does not produce an ex
cellent weld appearance as MIG welding does
This machine does not have a built in Gas Solenoid so a one
piece gas valve TIG Torch is required, The gas valve must
be opened manually before welding and closed manually
when welding is completed. The arc is activated using a lift
arc technique
Observe all safety information
throughout this manual.
-11-
To Next Page
Loading...
