2-3
IM AQ6370E-02EN
Feature Summary
2
2.2 Measurement Summary
Scale (Details chapter 2 in IM AQ6370E-01EN)
Vertical Scale
The vertical axis of the waveform display area has a level scale and a sub level scale, and each
scale can be set to a log scale or linear scale to display optical power levels.
In addition, a power spectral density display function, which shows power per nm (dB/nm) and a
noise mask function, which masks levels at or less than the specified value are available.
Horizontal Scale
The horizontal scale of the waveform display area can be set to wavelength (nm) or frequency (THz).
You can specify a wavelength to zoom in on a waveform or pinch out or pinch in on the touch panel
to adjust the zoom display.
While the zoom display is shown, an overview window (entire waveform) is shown at the bottom of
the waveform display area where you can view the zoom range.
To Next Page
Loading...
Need help?
General
