4-12
IM AQ6370E-02EN
Using the parameter input window
1.
Tap a key of a function menu with parameters. A parameter input window appears, and the
current value is displayed in the value display area.
2.
Tap the numeric keypad to input a value. The input value appears below the current value.
To correct a value, tap
(backspace) to delete numbers from the right, and enter the correct
numbers.
3.
After entering a value, tap nm/ENT depending on the parameter unit.
The value is applied.
4.
Tap to close the parameter input window.
Numeric keypad
Minimize key
Parameter input window Minimized state
COARSE/FINE
Increase/decrease key
Note
If the value entered with the numeric keypad is not in the allowed value range, the nearest allowed value
will be set.
4.4 Entering Numerical Values and Strings
To Next Page
Loading...
Need help?
General
