YOKOGAWA AXF series - Page 71

IM 01E20D01-01E
6-13
6. OUTLINE
General-Purpose Use and Explosion proof Type,
Integral flowmeter (electrode structure code 1:
Non-replaceable electrode)
Pressure
MPa (psi)
4 (580)
3.25 (471)
2 (290)
–0.1(–14.5)
2.5 to 50 mm (0.1 to 2.0 in.)
80 to 200 mm (3.0 to 8.0 in.)
–10
(14)
0
(32)
100
(212)
130
(266)
180
(356)
Temperature °C (°F)
F19-2.EPS
*1: For fluid temperature of the explosion proof type, refer
to descriptions of “HAZARDOUS AREA CLASSIFI-
CATION”.
Polyurethane Rubber Lining
General-Purpose Use and Submersible Type, Remote
Flowtube (electrode structure code 1: Non-replace-
able electrode)
F20-1.EPS
Pressure
MPa (psi)
4 (580)
–10
(14)
0
(32)
40
(104)
Temperature °C (°F)
2 (290)
1 (145)
–
0.1(–14.5)
0.75(109)
25 to 50 mm (1.0 to 2.0 in.) (flange type, wafer type)
65 to 200 mm (2.5 to 8.0 in.) (flange type, wafer type)
250, 300 mm (10, 12 in.) (flange type)
250, 300 mm (10, 12 in.) (wafer type)
350, 400 mm (14, 16 in.) (flange type)
General-Purpose Use, Integral Flowmeter (electrode
structure code 2: replaceable electrode)
F20-2.EPS
Pressure
MPa (psi)
2 (290)
1 (145)
–
0.1(–14.5)
25 to 200 mm (1.0 to 8.0 in.) (flange type, wafer type)
250, 300 mm (10, 12 in.) (flange type)
250, 300 mm (10 , 12 in.) (wafer type)
350, 400 mm (14 , 16 in.) (flange type)
–10
(14)
0
(32)
40
(104)
Temperature °C (°F)
Natural Soft Rubber Lining
General-Purpose Use and Submersible Type, Remote
Flowtube (electrode structure code 1: Non-replace-
able electrode)
F05-2.EPS
4(580)
2(290)
1(145)
– 0.05(–7.3)
*1
*1 : –0.04 MPa (–5.7 psi) for sizes of 350 mm (14 in.) and 400 mm (16 in.)
Pressure
MPa (psi)
–10
(14)
0
(32)
40
(104)
80
(175)
Temperature °C (°F)
50 mm (2.0 in.) (flange type, wafer type)
65 to 200 mm (2.5 to 8.0 in.) (flange type, wafer type)
250, 300 mm (10, 12 in.) (flange type)
250, 300 mm (10, 12 in.) (wafer type)
350, 400 mm (14 , 16 in.) (flange type)
EPDM Rubber Lining
General-Purpose Use and Submersible Type, Remote
Flowtube (electrode structure code 1: Non-replace-
able electrode)
4(580)
2(290)
1(145)
– 0.05(–7.3)
*1
Pressure
MPa (psi)
–10
(14)
0
(32)
40
(104)
80
(175)
Temperature °C (°F)
50 mm (2.0 in.) (flange type, wafer type)
65 to 200 mm (2.5 to 8.0 in.) (flange type, wafer type)
250, 300 mm (10, 12 in.) (flange type)
250, 300 mm (10, 12 in.) (wafer type)
350, 400 mm (14, 16 in.) (flange type)
F05-3.EPS
*1 : –0.04 MPa (–5.7 psi) for sizes of 350 mm (14 in.) and 400 mm (16 in.)